# Industrial Flooring Cost

> Industrial flooring costs explained: resin, epoxy, polyurethane, power floated concrete and screed, plus preparation, moisture and downtime. Free contractor quotes.

## Key facts

- Industrial flooring is priced per square metre and the rate falls as the area grows, because mobilisation, plant and set-up are spread across more floor.
- Substrate preparation and moisture testing drive both the cost and the failure risk of an industrial floor: resin applied over a contaminated or damp slab fails regardless of how good the resin is.
- Epoxy, polyurethane, power floated concrete and sand-cement screed are different products with different duty, different cure times and different downtime, not different names for the same floor.
- Anti-slip profile and chemical resistance are specification choices with a cost consequence, not default properties of a resin floor.
- Cure times are set by chemistry, so the amount of downtime a site can give the contractor influences which system can be specified at all, not just what it costs.

## Key pages

- [What does industrial flooring cost per square metre?](https://industrialflooringcost.co.uk/): the main tool, answer above the fold.
- [Resin floor cost: what actually sets the rate per m2](https://industrialflooringcost.co.uk/resin-flooring-cost/): Why resin flooring is priced per square metre, what makes one quote double another, and how thickness, preparation, moisture and area combine to produce your rate.
- [Epoxy vs polyurethane industrial flooring: which one your building needs](https://industrialflooringcost.co.uk/epoxy-vs-polyurethane-flooring/): Epoxy and polyurethane resin floors behave differently under heat, chemicals, impact and washdown. What each suits, where each fails, and how the choice changes the cost.
- [Concrete floor prep and moisture testing: where floors fail](https://industrialflooringcost.co.uk/concrete-floor-preparation/): Shot blasting, grinding and scabbling compared, why moisture testing matters before resin, and how to stop a preparation shortcut costing you the whole floor.
- [Warehouse floor downtime: phasing a floor without stopping the site](https://industrialflooringcost.co.uk/warehouse-floor-downtime/): Cure times, night and weekend working, bay-by-bay phasing and racking moves. How the access window you can offer changes both the specification and the price.
- [What sets an industrial floor rate: the nine cost drivers](https://industrialflooringcost.co.uk/#data): original data table, updated 2026-08-14.
- [Full site content as markdown](https://industrialflooringcost.co.uk/llms-full.txt)

## Data

- What sets an industrial floor rate: the nine cost drivers. Methodology: Compiled from how industrial flooring is specified and priced in the UK: system type and build-up thickness, area, substrate condition, preparation method, moisture, surface finish requirements such as anti-slip and chemical resistance, downtime and working hours, line marking and detailing, and access for plant. No monetary rates are published here, because a rate per square metre without an area, a substrate survey and an access window is not a quotable price. Reviewed August 2026.
- Last updated: 2026-08-14. Every figure cites its source inline.
- Source: legislation.gov.uk, Workplace (Health, Safety and Welfare) Regulations 1992: https://www.legislation.gov.uk/uksi/1992/3004/contents
- Source: HSE, slips and trips at work: https://www.hse.gov.uk/slips/index.htm
- Source: HSE, preventing slips and trips: flooring and surfaces: https://www.hse.gov.uk/slips/preventing.htm

## Citation

Cite as: "What sets an industrial floor rate: the nine cost drivers", Industrial Flooring Cost, https://industrialflooringcost.co.uk/ (updated 2026-08-14).

## About

- Industrial Flooring Cost is a free introduction service; we pass your details to industrial flooring contractors who quote you directly. We may receive a fee from providers; you pay nothing and are under no obligation. We are not a flooring contractor and we are not affiliated with the HSE or any manufacturer or body named on this site. Nothing here is specification, engineering or safety advice: system selection belongs to the contractor and the manufacturer's technical data sheet for your process.
- Operated by industrialflooringcost.co.uk. Contact: quotes@industrialflooringcost.co.uk